Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• integrated mechanically lockable webcam with IR, M icrosoft Windows He llo feature and
FHD resolution (1920 x 1080) (P2410 WE CAM and P2410 TS CAM model)
• TFT display (Thin Film Tran
sistor; active matrix)
• minimal space requirements thanks to slim casing
• optimum ergonomic char
acteristics (excellent picture definition and co lour
purity right into the co
rners)
• high degree of brightness and good co ntrast
• optimal resolution (T
E and TS mod el: 1920 x 1080 / WE and WS model: 1920 x 1200)
• presentation of up to 1,07 billion colours (in conjunction with an appropriate graphics card)
• automatic scanning o
f horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequen
cies) from 48 to 76 Hz (absolutely flicker-free)
• Digital screen controller with microprocessor for storing 36 different display modes
• freely adjustabl
e colour alignment for matching the screen colours to the
colours of variou
s input and output devices
• convenient operation via integrate d OSD (On-Screen-display) menu
• VESA-DDC compat
ibility
• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device for swivel arm or a similar accessory
• Plug&Play cap
ability
• Digital video inputs (USB-C, DisplayPort a nd HDMI) with HDCP
• power manage
ment for reducing power consumption when the c omputer is not in use
• Compliance with the recommendations according to the latest TC O requirements
• the monitor
fulfills all GS ("Geprüfte Sicherheit", Certified Security) requireme nts.
This o perating manual contains important information you require to start up and run your LCD monitor.
A digital graphics card with display port and/or USB-C interface or a video signal source with
HDMI interface is required to control the LCD monitor. B-series monitors can alternatively
be controlled via an analogue VGA or DVI-D interface. Th e monitor processes the data
supplied to it by the graphics card. The graphics card or the corresponding driver software
is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into o peration for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in acco rdance w ith y our
needs (see chapter "
Changing the monitor settings", Page 27).
Target group
You d
on’t need to be an "expert" to perform the operations described here.
None
theless, it is important to always observe the safety notes given in the operating
ins
tructions for the computer and in this manual.
In t
he event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5
To Next Page
Loading...
Need help?
General