E-25
EnglishDeutschEspañolFrançaisItalianoPortuguês
ᣣᧄ⺆
Póññêèé
፩ၭ
BASIC PROCEDURES OF ADJUSTMENT MENU
• Shown below is the basic procedure used to change the
options on the ADJUSTMENT MENU. (Ex.: Adjusting tint
setting (Tint))
• Selecting the adjustment mode for adjustment or setting.
(The items to be adjusted or set are stored for each
adjustment mode.)
1
Press ; .
The main menu screen will appear.
2
PressC or D to select "Display
Menu" and press
F or <.
The "Display Menu" appears.
3
Press C or D to select "PICTURE"
and press
F or <.
Each time you press C or D, one of the available
menus appears in the following sequence:
PICTURE < AUDIO < POSITION/SIZE <
FEATURES < FACTORY DEFAULT
The "PICTURE" menu screen will appear.
4
Press C or D to select "Tint".
5
Press F or <, and press E or F to
change Tint values.
F: More greenish colors
E: More purplish colors
6
Press < to store.
7
Press ; or J when you finish.
* Repeat steps 3, 4, 5 and 6 when you wish to make
changes to other options.
* Select "Default", press
<, select "YES" and press
<. The PICTURE items are changed back to the
default settings available when the display was
purchased.
* Press
; or J to halt the operation in
progress.
"Display Menu"
selected in the main menu
screen
"
PICTURE
"
selected in the main menu
screen
"
Tint
"
selected in the PICTURE Menu
screen
"Tint" adjustment screen
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
To Next Page
Loading...
Need help?
General