E-7
EnglishDeutschEspañolFrançaisItalianoPortuguês
ᣣᧄ⺆
Póññêèé
፩ၭ
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Input mode selection button
Switches the input modes (Video mode, RGB mode, IEEE1394
mode and TV mode).
Volume button
Adjusts the sound volume.
Wide screen selection button
Switches the screen over to a desired wide screen.
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red): Standby state
Lit (green): Power ON state
Flashing (red or green): Malfunction (Flashes differently
depending on the type of
malfunction.)
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Remote control signal receiver
Receives the signals from the remote control.
Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. In this circumstance, leaving the display power ON can result in fire or electric shock.
37” model
50" / 65" model
Note
• The pictures and diagrams in this manual are meant to complement the explanations and may differ slightly from the actual items.
To Next Page
Loading...
Need help?
General