Fujitsu Plasmavision P37FT05AUB User Manual

E-27
EnglishDeutschEspañolFrançaisItalianoPortuguês
ᣣᧄ⺆
Póññêèé
፩ၭ
Even more advanced picture quality adjustments can be made
as required.
Press
F to strengthen the reproduction of black. (Provides a
picture quality with deep blacks.)
Press
E to weaken the reproduction of black.
Press
< to store.
Corrects the gradation of the light and dark areas of the picture.
Each time
E or F is pressed, the setting is switched.
< On < Off <
Press < to store.
This enables noise reduction processing with respect to the
input signal noise level (reduces screen flicker for more
comfortable viewing).
Each time you press E or F, the available choices appear in the
following sequence.
< Off < Min. < Mid. <
Max. <
Press < to store.
This enables noise reduction processing of mosquito noise or
block noise generated when digital picture signals are recorded
or replayed.
Each time you press E or F, the available choices appear in the
following sequence.
< Off < Min. < Mid. <
Max. <
Press < to store.
This performs detailed image quality settings.
• Image Identify (RGB)
This function discerns between the natural image display
section and the text display section, and performs correction to
enable an optimized display for each.
Each time
E or F is pressed, the setting is switched.
< On < Off <
Press < to store.
• Chroma Transient
This function corrects the color contours.
Each time
E or F is pressed, the setting is switched.
< On < Off <
Press
< to store.
Use
E or F to specify a desired color temperature. Each time
you press
E or F, one of the available choices appears in the
following sequence:
< -3500K < ... < Std. < ... < +3500K < User <
[–3500K]: More reddish colors
[+3500K]: More bluish colors
[User]: User Color Temp. setup
Press
< to store.
Use
C or D to select Red, Green, or Blue, and adjust the
color temp. for each.
Press
F: to strengthen the selected color.
Press E: to weaken the selected color.
Press < to store.
Precision Setting
Black Level
Detail Gradation
3D NR
CODEC NR
Precision Setting Selection Screen
Image Enhance
Color Temp.
User Color Temp.
Note
• If the operation is not executed for about 60 seconds, the menu disappears.
• Some functions are not available depending on the state or condition of use.
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

Fujitsu Plasmavision P37FT05AUB Specifications

General

Brand	Fujitsu
Model	Plasmavision P37FT05AUB
Category	Monitor
Language	English