Fujitsu Plasmavision P37FT05AUB User Manual

E-41
EnglishDeutschEspañolFrançaisItalianoPortuguês
ᣣᧄ⺆
Póññêèé
፩ၭ
TV SETTING (TV MENU)
The tuner setting procedure is as follows:
Press C or D to select a target item below.
Channel Setting < CableCARD < Emergency Alert
Press
F or < to move on to the next step.
Press
C or D to select a target item below.
Auto Scan < Channel Edit < Favorite Ch < 
Multi Ch Audio < Audio Language <Fact Ch Reset
Press
F or < to move on to the next step.
Scans the Antenna or Cable and automatically searches for a
receivable channel and enters that channel in the channel
listing.
Use
C or D to select Yes.
When
< is pressed, Auto Scan starts. Auto Program MENU
appears and Auto Scan is performed.
* When Auto Scan is executed after selecting the
"ANTENNA" input mode by pressing
, only the
signals from "ANTENNA" are auto scanned.
* When Auto Scan is executed after selecting the "CABLE"
input mode by pressing , only the signals from
"CABLE" are auto scanned.
This function displays channels scanned by Auto Scan.
When
/ or 0 is operated, the function also determines
whether to select the channel.
Press
C or D to select a target channel.
Press E or F to switch between the items.
< Add < Skip <
[Add]: Selects a channel.
[Skip]: Disables channel selection.
Channel Setting
Auto Scan
"TV Menu" Screen
"Channel Setting" Screen
"Auto Scan" Screen
Channel Edit
"Channel Edit" Screen

Fujitsu Plasmavision P37FT05AUB Specifications

General

Brand	Fujitsu
Model	Plasmavision P37FT05AUB
Category	Monitor
Language	English