Fujitsu Plasmavision P37FT05AUB User Manual

E-32
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
• You can make changes to all screen adjustment options in the
POSITION/SIZE Menu.
• See Page E-25 for the basic procedures.
• The changes you make will be stored for the selected input
mode. Therefore, you need to select a desired input mode
before making any changes.
• The adjustment range may vary depending on the input
signal.
Horizontal position (Horizontal)
F: Moves the screen picture to the right.
E: Moves the screen picture to the left.
Vertical position (Vertical)
C: Moves the screen picture up.
D: Moves the screen picture down.
Press
< to store.
Screen width (Width)
F: Increases the width.
E: Reduces the width.
Screen height (Height)
C: Increases the height.
D: Reduces the height.
Press
< to store.
Position
POSITION/SIZE Menu screen
"Position" adjustment screen
Size
"Size" adjustment screen
Note
• Some functions are not available depending on the state or condition of use. (The adjustment screen may also vary slightly.)
• The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

Fujitsu Plasmavision P37FT05AUB Specifications

General

Brand	Fujitsu
Model	Plasmavision P37FT05AUB
Category	Monitor
Language	English