E-10
PART NAMES AND FUNCTIONS (Continued)
For details, see page Î.
REMOTE CONTROL
(POWER button) Î E-19
Press to switch between Power On and Standby.
[ (LIGHT button)
Press to light the buttons of the remote control.
When no operation is performed, lighting of the buttons goes off after 8 seconds.
4 (FINE mode button) Î E-22
Press to switch the Picture Mode.
(WIDE button) Î E-22
Press to switch to a desired wide screen.
3 (DISPLAY button) Î E-22
Press to display the channel, input mode, and screen size status.
The status is displayed for about five seconds.
5 (PICTURE MEMORY button) Î E-22, E-30
Press to recall the Picture Memory.
7 (OFF-TIMER button) Î E-22
Press to specify the length of time until the power automatically turns off (stand-by
state).
_ (INFORMATION button) Î E-21
Press to display the current channel information.
(TV button) Î E-20
Press to watch TV broadcasting.
(VIDEO button) Î E-20
Press to switch from VIDEO1 through VIDEO6.
(RGB button) Î E-20
Press to select RGB1.
㨪 , ! (Number buttons) Î E-20
Press to directly select a channel.
"
: (CHANNEL RETURN button) Î E-20
Press to return to the previous channel, Video mode, or RGB mode.
$
/ or 0 (Channel Up/Down buttons) Î E-20
Press to select the preset programs.
%
G (MTS/STEREO button) Î E-21
Press to select the audio mode such as MTS (Multi-channel TV Sound) or stereo.
&
1 or 2 (VOLUME buttons) Î E-19
Press to adjust the volume control.
Note
• When the buttons are lighted by pressing [, the battery life is shortened.
To Next Page
Loading...
Need help?
General