EasyManuals Logo
Home>Fujitsu>Scanner>ScanSnap S300

Fujitsu ScanSnap S300 Getting Started Guide

Fujitsu ScanSnap S300
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
23
2. Change the scanning settings
on the [ScanSnap Manager -
Scan and Save Settings]
dialog box.
You can update your last-saved
settings for scanning when
[SCAN Button Settings] is
selected.
There are six tabs used to
configure the scan options at
maximum (The number of tabs
displayed and items that can be
configured vary depending on
the interacting application and
the Operation mode.)
3. Click the [OK] button to finish
the configuration.
The new settings are enabled.
3.3 Scanning Office Documents
This section describes how to scan the documents generally used in most offices. The
ScanSnap can scan the documents in various sizes.
1. Pull up the Paper chute guide and open the extension in the order given,
and load the documents onto the scanner.
For details of how to scan documents, refer to "Chapter 3 Using the
ScanSnap" of "ScanSnap S300 Operator’s Guide."
ABCDEFG
ABCDEFG
1234567890
1234567890
Set the paper face-
down with its top
margin towards the
scanning direction.
Scanning
direction
[SCAN] button
Paper chute guide
Side
guide

Other manuals for Fujitsu ScanSnap S300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S300 and is the answer not in the manual?

Fujitsu ScanSnap S300 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 360 mm
Scanner typeSheet-fed scanner
Sensor typeCIS
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity10 sheets
Bundled softwareScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight64 - 104.7 g/m²
Dimensions (WxDxH)284 x 95 x 77 mm
Power requirementsAC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)2 x 2 \
Minimum RAM512 MB
Minimum storage drive space920 MB
Compatible operating systemsWindows 2000 Professional, Windows XP, Windows Vista
Power supply typeAC/USB
Power consumption (standby)5 W
Power consumption (typical)9 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Weight1400 g

Related product manuals