EasyManuals Logo
Home>Fujitsu>Scanner>ScanSnap S300

Fujitsu ScanSnap S300 Getting Started Guide

Fujitsu ScanSnap S300
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
33
5.3 Cleaning Inside of the Scanner
Clean inside of the scanner with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and
dust inside the scanner causes a scanning error.
As a guideline, clean the ADF every 200 sheets of documents. Note that this guideline
varies according to the type of documents you are scanning. For example, the ADF must
be cleaned more frequently when scanning documents on that the toner has not been
sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations.
1. Open the ADF while pulling the Cover open lever.
2. Clean the following locations with a cloth moistened with Cleaner F1.
ATTENTION
Never use water or neutral detergent to clean the inside of the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt
and dust to enter the scanner, resulting in the scanner failure, malfunction
and image error.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner
ADF
Cover open lever

Other manuals for Fujitsu ScanSnap S300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S300 and is the answer not in the manual?

Fujitsu ScanSnap S300 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 360 mm
Scanner typeSheet-fed scanner
Sensor typeCIS
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity10 sheets
Bundled softwareScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight64 - 104.7 g/m²
Dimensions (WxDxH)284 x 95 x 77 mm
Power requirementsAC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)2 x 2 \
Minimum RAM512 MB
Minimum storage drive space920 MB
Compatible operating systemsWindows 2000 Professional, Windows XP, Windows Vista
Power supply typeAC/USB
Power consumption (standby)5 W
Power consumption (typical)9 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Weight1400 g

Related product manuals