Fujitsu ScanSnap S300 Getting Started Guide

35
Chapter 6 Consumables
This chapter describes how to replace and purchase consumables and regular replacement
parts.
The following table lists the part numbers of consumables and shows rough guidelines
for replacing these parts.
These replacement cycles are rough guidelines when A4/Letter wood-free paper 64 g/m
2
(17 lb) is used. The actual cycle may differ depending on the scanned paper.
Use only the consumables specified by PFU LIMITED.
WARNING
• Before cleaning the scanner, turn the scanner OFF to prevent fire or
electric shock.
• To avoid injuries, do not place the internal parts (such as the Pad
ASSY and Pick roller) in areas where small children can reach.
No Description P/N Replacement Cycle
1 Pad ASSY PA03541-000
2 10,000 sheets or one year
2 Pick roller PA03541-000
1 100,000 sheets or one year
HINT
To estimate when the consumables will have to be replaced and to get
an overlook of the already scanned pages, refer to the following:
1. Right-click the [ScanSnap Manager] icon on the task bar.
2. Click [Check consumable supplies] at the menu.
⇒ The window ([Check consumable status] screen) that indicates how many
times consumables have been used will be displayed.
Replace the consumables referring to "Target value to change supplies" as a
rough guideline.
For details about consumables and where to purchase them, visit the
following Website or contact the Fujitsu scanner dealer where you
purchased your scanner.
[Website] http://scansnap.fujitsu.com/
S

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g