Fujitsu ScanSnap S510 User Manual

4.6 About Automatic Interaction with Applications
ScanSnap S510 Operator's Guide 111
Setting the ScanSnap
4
4.6 About Automatic Interaction with Applications
ScanSnap Organizer and CardMinder can automatically interact with the ScanSnap upon startup.
There are two ways of interacting.
■ Automatic Interaction Mode (When to Interact)
(1) When any one of above applications is selected (active), the ScanSnap interacts
with it. (Default setting)
When ScanSnap Organizer or CardMinder becomes active, or, in other words, when one of
them is selected on the task bar and its window is brought to the front, an application
selected in the "Application" drop-down list on the [Application] tab of the "ScanSnap
Manager - Scan and Save Settings" dialog box is automatically switched to the active
application. When you scan documents, scanned document images are opened with the
active application.
When the application becomes inactive or it is deselected, the ScanSnap no longer interacts
with the application.
Not interacting
Interacting

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g