Fujitsu ScanSnap S510 User Manual

218
7.1 Clearing Document Jams
If a paper jam occurs during scanning, follow the procedure below to remove the jammed
document.
CAUTION
• Open the ADF before removing the jammed document.
• Be careful when removing the jammed document.
• When removing the jammed document, be careful not to get neckties or necklaces
entangled in the ScanSnap.
• The surface of the ADF glass becomes hot during operation. Take care not to get burned.
Operation
1. Remove the document on the paper chute.
2. Open the ADF while pulling the cover open lever.
HINT
Clean the ADF by following the guidelines in "8.3 Cleaning the Inside of the
Scanner" (page 232).
Paper chute
Cover open lever
ADF

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g