Fujitsu ScanSnap S510 User Manual

6.1 Using ScanSnap Manager
ScanSnap S510 Operator's Guide 177
Using the ScanSnap in Various Ways
6
■ Skipping blank pages
ScanSnap is able to recognize blank pages and remove them from the output data. When scanning
documents in "Duplex" mode, both sides of the documents are scanned regardless if their
backsides are printed or not. Though the empty back sides are scanned, they are recognized as
"blank" and automatically removed, so they will not appear on the output data.
To change the setting, follow the procedure below.
Operation
1. Right-click the ScanSnap Manager icon on the task bar, and then select "SCAN
Button Settings" from the menu.
2. Select the [Scanning] tab and click the [Option] button.
S
S

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g