Fujitsu ScanSnap S510 User Manual

9.3 Replacing the Pick Roller
ScanSnap S510 Operator's Guide 243
Replacing Consumables and Carrier Sheet
9
9.3 Replacing the Pick Roller
Replace the Pick roller following the procedure below.
1. Remove the documents on the paper chute.
2. Open the ADF while pulling the cover open lever.
3. Adjust the Side guide to the "A5" size.
ADF
Cover open lever
Paper chute
A5
A5

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g