Fujitsu ScanSnap S510M User Manual

206
8.1 Cleaning Materials
*1) To purchase cleaning materials, contact the FUJITSU scanner dealer where you
purchased the ScanSnap.
*2) Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths.
*3) Any lint-free cloth can be used.
Cleaning Materials Parts No. Remarks
Cleaner F1 PA03950-0352 1 bottle (100ml)
Moisten a cloth with this fluid
and wipe the ScanSnap
clean.
(*1)
Cleaning wipe PA03950-0419 1pack (24 sheets)
(*1) (*2)
Lint-free dry cloth Commercially available. (*3)
ATTENTION
• Never use paint thinner and other organic solvents.
• During the cleaning, prevent water or moisture from getting inside the
ScanSnap.
• It may take long before the cleaner vaporizes if a large quantity is used. When
cleaning the ScanSnap parts, dampen a cloth with modest quantities of the
cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to
leave no residue on the surface of the cleaned parts.

Fujitsu ScanSnap S510M Specifications

General

Brand	Fujitsu
Model	ScanSnap S510M
Category	Scanner
Language	English