Fujitsu ScanSnap S510M User Manual

4.2 Changing Scanning Settings
ScanSnap S510M Operator's Guide 71
Setting the ScanSnap
4
[Paper size] tab
■ Paper size:
Specify the paper size of the document to be loaded onto the ScanSnap.
Click to select the size. The following paper sizes (Width x Length) can be
selected.
• Automatic detection
• Letter (8.5 x 11 in (216 x 279.4 mm))
• Legal (8.5 x 14 in (216 x 355.6 mm))
• A4 (210 x 297 mm)
• A5 (148 x 210 mm)
• A6 (105 x 148 mm)
• B5 (JIS) (182 x 257 mm)
• B6 (JIS) (128 x 182 mm)
• Post card (100 x 148mm)
• Business card (90 x 55 mm, 55 x 90 mm)
• Custom size (up to ten sizes can be registered)
ATTENTION
• Depending on the document size and scanning settings, the output
image data may contain shadows of its edges.
• To use the Carrier Sheet, "Automatic detection" must be selected.
HINT
We recommend use of the Automatic detection settings.

Fujitsu ScanSnap S510M Specifications

General

Brand	Fujitsu
Model	ScanSnap S510M
Category	Scanner
Language	English