42
■ Finishing ScanSnap operation
Exiting "ScanSnap Manager"
Operation
Click and hold the mouse button on the ScanSnap Manager icon in the Dock menu, and
select "Quit" from the menu.
Disconnecting the ScanSnap
1. Close the paper chute to turn off the ScanSnap.
⇒ The ScanSnap Manager icon changes to . The power indicator goes out.
2. Unplug the USB cable from your computer.
3. Unplug the power cable from the power outlet.
HINT
To operate the ScanSnap, "ScanSnap Manager" must be active (stay resident).
When you want to resurrect "ScanSnap Manager," select the destination where
the ScanSnap is installed (generally, "Applications" - "ScanSnap") from Finder,
and then select "ScanSnap Manager."
(*You do not have to quit "ScanSnap Manager" under normal conditions.)
HINT
The ScanSnap is turned off in conjunction with your computer or opening/
closing of the paper chute. Ordinarily, you can forget about turning on/off the
ScanSnap being connected to your computer.
To Next Page
Loading...
Need help?
General