5. VIDEO PLOTTER OPERATION
5-6
5.4.4 How to delete marks
Marks can be deleted one at a time, or all at once.
How to delete marks individually
1. Select the operational display area, then right-click to show the [CURSOR] con-
text menu.
2. Select [MARK DELETE]. The cursor changes to a highlighted cursor.
3. Place the highlighted cursor on the mark to be deleted, then left-click.
Note: The position of the cursor determines how lines are deleted. To deleted a
line segment, put the cursor on the starting point (or end point). To delete consec-
utive line segments, put the cursor on the connecting point.
4. Repeat step 3 to delete another mark, or press the right button to return the cur-
sor to normal function.
How to delete all marks
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plot-
ter functionality, this menu appears
as [2 MARKS•CHART].
3. Select [8 DELETE DATA].
4. Select [2 ALL MARKS].
5. Select [YES].
6. Close the menu.
*1: Color selection available for A/B/W-
types only.
*2: Shown only on IMO/R-types.
*3: Shown only for B/W-types.
Click starting point/ending point.
Click connecting point.
To Next Page
Loading...
Need help?
General
