5. VIDEO PLOTTER OPERATION
5-14
5.8.3 How to set the track color (A/B/W-types only)
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, select [2 MARKS•CHART].
3. Select [7 TRACKS].
4. Select [2 OWN TRACK] or [3 TARGET TRACK] as appropriate.
5. Select [4 OWN TRACK COLOR]. The following colors are available.
6. Select the appropriate setting.
7. Close the menu.
5.8.4 How to automatically plot target tracks (A/B/W-types only)
You can automatically plot target tracks for TT target numbers 001 to 015.
Note 1: [3 SAVE INTERVAL] must be set to other than [OFF] to show tracks.
Note 2: When this feature is active, only the tracks TT targets 001 through 015 are
plotted.
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, select [2 MARKS•CHART].
3. Select [7 TRACKS].
4. Select [3 TARGET TRACK].
5. Select [5 AUTO TARGET TRACK].
6. Select [OFF] or [ON] as appropriate.
Note: When [5 AUTO TARGET TRACK] is set to [ON], [TARGET TRACK ON] and
[TARGET TRACK OFF] are disabled and are not displayed in the [CURSOR]
menu.
7. Close the menu.
• [RED] (Red)
• [YEL] (Yellow)
• [WHT] (White)
• [GRN] (Green)
• [CYA] (Cyan)
• [BLU] (Blue)
• [MAG] (Magenta)
To Next Page
Loading...
Need help?
General
