5. VIDEO PLOTTER OPERATION
5-3
5.4 Radar Map
Note: The location and orientation of mark symbols and mark lines can change, de-
pending on the display presentation mode, as shown in the table below.
5.4.1 How to show/hide radar map marks
You can show or hide marks on the radar map.
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, this menu appears as [2
MARKS•CHART].
3. Select [5 RADAR MAP].
The [RADAR MAP] menu appears.
Note: You can also right-click the [MARK] box to open the [RADAR MAP] menu.
4. Select [0 NEXT] to show the next menu page.
5. Select [2 MAP DISPLAY].
6. Select [ON] or [OFF] as appropriate.
Note: You can also show/hide the radar map marks from the Radar Map button
on the InstantAccess bar
™
.
7. Close the menu.
A radar map is a combination of map lines and symbols whereby the user can define
and input the navigation data, route planning and monitoring data. The radar map can
contain 20,000 points of data. Inscribed marks are retained when the power is turned
off.
The radar map is referenced to the WGS-84 datum and appears only when there is valid
position data input. The radar map does not affect any radar functions.
Presentation mode Mark symbol Mark line
HEAD UP RM
STERN UP RM
STAB HEAD UP RM
Location is changed accord-
ing to heading and own ship
position.
Orientation is unchanged.
Location and orientation are
changed according to heading
and own ship position.
COURSE UP RM
NORTH UP RM
NORTH UP TM
Location is changed accord-
ing to own ship position.
Orientation is unchanged.
Location and orientation are
changed according to own
ship position.
MAP
OFF
MAP
ON
Click to toggle
Hide the
radar map
Show the
radar map
To Next Page
Loading...
Need help?
General
