1. OPERATIONAL OVERVIEW
1-6
1.4.1 InstantAccess bar
™
buttons
Button Description
Upper Half
Standby/Transmit button.
Toggle between standby (STBY) and transmit (TX).
Pulselength button.
Selects the pulselength.
Tune button.
Toggles between automatic and manual tuning. (See section 1.17.1.)
Note: For SSD antennas, this button appears as "TX CH x" (“x” denotes the channel
used for transmission). If your radar is receiving interference from another radar oper-
ating at the same frequency, use the [TX CH] button to change the TX frequency.
Interference Rejector button.
Activates/deactivates the interference rejector feature.
Echo Stretch button.
Activates/deactivates the echo stretch function.
Echo Average button.
Activates/deactivates the echo average function.
Note: This item is grayed out under the following conditions:
• ACE function is active.
• No position data is input (excludes Dead Reckoning).
ACE button.
Activates/deactivates the ACE (Auto Clutter Elimination) function.
Lower Half
Chart button.
• Shows/hides the chart.
• Opens the [CHART] menu.
Note: Appears on A/B/W-types with Radar Plotter functionality only.
Radar Map button.
Shows/hides the radar map marks.
HEADING LINE button.
Left-click and hold to hide the heading line, range rings and OS symbol.
CU/TM RESET button
• Puts the ship’s heading at the top of the screen in course-up mode the moment this
button is pressed.
• Resets the ship's position to a point of 75% radius opposite to the extension of the
heading line passing through the display center in true motion modes.
Own Ship AIS button.
Shows the AIS VOYAGE DATA for AIS data setup.
AIS Message button.
Opens the AIS Message menu, allowing you to view received AIS messages.
Brilliance button.
• Adjusts the screen brilliance
• Opens the [BRILLIANCE] menu.
• Selects the color palette. See section 1.45.1.
PULSE
L
To Next Page
Loading...
Need help?
General
