APPX. 3 ALERT LIST
AP-12
3043, 2 TT TGT
95%(MAN)
"CANCEL NON-DANGEROUS TT TARGETS MANUAL-
LY"
Caution
Cat: B
Meaning: Manually acquired target capacity has reached 95%.
Remedy: Press the ALARM ACK key. Remove TT symbols manually.
3043, 3 AIS DISPLAY
95%
"ADJUST [AIS DISP FILTER] SETTINGS" Caution
Cat: B
Meaning: AIS display capacity has reached 95% (333 targets).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of targets displayed.
3043, 4 AIS CPTY
95%
"ADJUST [AIS DISP FILTER] SETTINGS" Caution
Cat: B
Meaning: AIS capacity has reached 95% (1140 targets).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of targets displayed.
3043, 5 AIS CPTY
FULL
"ADJUST [AIS DISP FILTER] SETTINGS" Warning
Cat: A
Meaning: AIS capacity has reached 100% (1200 targets).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of targets displayed.
3043, 6 ACTIVE AIS
95%
"SLEEP NON-DANGEROUS AIS TARGETS MANUALLY" Caution
Cat: B
Meaning: Active AIS target capacity has reached 95% (48 targets).
Remedy: Press the ALARM ACK key. Sleep all unnecessary AIS targets.
3043, 7 AIS DATAREP
FULL
"ADJUST [AIS DISP FILTER] SETTINGS" Caution
Cat: B
Meaning: AIS data report capacity has reached 100% (50 objects).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of objects displayed.
3043, 8 AIS SART
FULL
"ADJUST [AIS DISP FILTER] SETTINGS" Caution
Cat: B
Meaning: AIS locating device capacity has reached 100% (20 objects).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of objects displayed.
3043, 9 AIS SYN TGT
FULL
"ADJUST [AIS DISP FILTER] SETTINGS" Caution
Cat: B
Meaning: AIS synthetic target capacity has reached 100% (50 objects).
Remedy: Press the ALARM ACK key. Adjust [AIS DISP FILTER] settings to decrease the
number of objects displayed.
3044 CPA/TCPA "TAKE EVASIVE ACTION IF NECESSARY" Alarm
Cat: A
Meaning: Target is within CPA/TCPA threshold, danger of collision.
Remedy: Press the ALARM ACK key. Take evasive action if necessary. Adjust CPA/
TCPA settings.
3048, 1 TT NEW TAR-
GET
"CONFIRM TT NEW TARGETS" Warning
Cat: A
Meaning: A new TT target has entered the Acquisition Zone.
Remedy: Press the ALARM ACK key. Confirm location of new target.
3048, 2 AIS NEW
TARGET
"CONFIRM AIS NEW TARGETS" Warning
Cat: A
Meaning: A new AIS object has entered the Acquisition Zone.
Remedy: Press the ALARM ACK key. Confirm location of new object.
Alert ID Alert title Alert Message
Priority &
Category
To Next Page
Loading...
