3-1
3. SYSTEM MENU
3.1 SYSTEM Menu Operation
1. Rotate the [FUNCTION] switch fully clockwise to select MENU.
2. Press the [] key to select the menu title area.
3. Press the [+] key to select SYSTEM to show the system menu.
DISP ALM TX/RX USER-1/2 SYSTEM
SYSTEM SETTING
ES/DRAFT SETTING
RANGE SETTING
TEMP SETTING
NET SONDE SETTING
USER COLOR SETTING
USER CLUTTER SETTING
ECHO LEVEL SETTING
NAV DATA SETTING
TARGET ECHO
STABILIZATION
TEST MODE
DEFAULT SETTING
[+]: Go to setting [EXIT (knob)]: Exit
Menu for system setting.
System menu
4. Press the [] or [] key to select the item which you want to set.
5. Press the [+] key to show the sub menu.
6. Rotate the [FUNCTION] switch fully counterclockwise to select EXIT.
The system menu disappears.
To Next Page
Loading...
Need help?
General
