Furuno GP-150 Installation Manual

9. MAINTENANCE & TROUBLESHOOTING
9-4
9.4 Troubleshooting
The table which follows provides troubleshooting procedures which you can follow to restore
normal operation. If normal operation cannot be restored, ask your dealer for advice.
Table 9-1 Troubleshooting table
If… Them…
You cannot turn on the power
• Check power connector for tight connection.
• Check if ship’s main is off.
• Check for blown fuse.
Position cannot be fixed
• Check antenna cable for tight connection and water leakage.
• Check if functional satellite has been disabled:
MENU ESC, 9, 6
Position is wrong
• Check if correct geodetic chart is entered: MENU ESC, 9, 6
• Apply position correction to GPS position: MENU ESC, 9, 6
Data cannot be transmitted to
external equipment
• Check if data format is correct: MENU ESC, 9-3, 9-4, 9-5
See the installation manual for further details.
• Tx interval may be set to “0”. Select proper interval.
MENU ESC, 9-3, 9-4, 9-5
See the installation manual for further details.
• Check appropriate settings on external equipment.
• Check connections:
GP-150
external equipment
TD-A RD-A
TD-B RD-B

Furuno GP-150 Specifications

General

Display Type	LCD
Display Size	4.5 inches
Resolution	320 x 240 pixels
Channels	12
Operating Temperature	-15°C to +55°C
Waterproof Rating	IPX5
Data Output	NMEA 0183
Type	GPS Receiver
Accuracy	10 meters
Languages	English