1-1
1. MOUNTING
1.1 Mounting Considerations
When selecting a mounting location, keep the following points in mind:
• Install the units indoors.
• Locate the units away from water splash.
• The operating temperature range of the processor unit is -15°C to 55°C (-27°F to
99°F). Be sure the mounting location satisfies this requirement.
• Locate the units away from exhaust pipes and vents.
• The mounting locations should be well ventilated.
• Mount the units where shock and vibration are minimal.
• Keep the units away from electromagnetic field-generating equipment such as mo-
tors and generators.
• Referring to the outline drawings at the back of this manual, leave sufficient room
for service and maintenance. Also, leave slack in cables for maintenance and ser-
vicing ease.
• A magnetic compass may receive interference if it is placed too close to these units.
Observe the compass safe distances noted in the safety instructions to prevent in-
terference to the magnetic compass.
• The processor unit is equipped with an internal LAN antenna and should be in-
stalled in a location where the signal is not interrupted or halted by obstructions.
If you cannot install the processor in an obstruction-free location, connect the
processor unit to a wireless LAN router via LAN cable to establish an ETHERNET
connection.
To Next Page
Loading...
Need help?
General