To Next Page

To Previous Page

LARGE CASSETTE TECHNICAL OVERVIEW

ENGLISH

E-8

Testing

Test Condensate Pump and Float Switch

If the internal condensate pump does not operate, the pump may be bad or the oat switch may be defective. Perform the

following test:

1. Access the electrical control box.

2. Unplug the oat switch from the circuit board.

3. The pump should start.

4. If the pump does not start, check for voltage at the pump connector on the board. There should be 230 Volts AC to the pump.

If there is not, the circuit board is defective. If there is proper voltage to the pump, either the pump or associated pump wiring

is defective.

2 4

Questions and Answers:

Need help?

Do you have a question about the GE ASH220NCDWA and is the answer not in the manual?

GE ASH220NCDWA Specifications

General