GE LOGIQ V1 Basic Service Manual

Block Diagram and Theory
LOGIQ V2/LOGIQ V1 – Basic Service Manual 5-3
5610739-100 English Rev.10
Block Diagram and Theory
General Information
LOGIQ V2/LOGIQ V1 is an ultrasound imaging scanner.
The system can be used for:
• 2D Gray Scale
• 2D Color Flow imaging
• M-Mode Gray Scale imaging
• Color M-Mode
• Doppler
• Different combinations of the above
Signal flow from the Probe Connector Panel to the Front End, to
the Mid Processors and Back End Processor and finally to the
LCD and peripherals.
System configuration is stored on a hard disk drive and all
necessary software is loaded from the hard disk drive on power
up.
Top Console
The Top Console includes a Standby/On switch, a keyboard,
different controls for manipulating the picture quality, controls for
use in Measure & Analyze (M&A), and loudspeakers for stereo
sound output (used during Doppler scanning).

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English