Loading the software
LOGIQ V2/LOGIQ V1 – Basic Service Manual 7-13
5610739-100 English Rev.10
Loading the software
Purpose of this section
This section describes how to reinstall software on
LOGIQ V2/LOGIQ V1.
Customer provided prerequisite
• Formatted and labelled media for Images storage.
• Formatted and labelled media for Patient Archive and
Presets (User Defined Settings).
• Password for the user ADM.
Data Management - moving all images
• Move the images to a remote server or to removable media.
For instructions, please see “Disk management” in the User
Manual/User Guide.
An error, or a power loss may occur.
Always backup the Patient Archive and the Presets (System
Configurations) before loading the software!
In order to complete a successful restore of the Patient
Database, as needed after a hard disk replacement, or if all the
content on the hard disk has been erased, the images must be
moved away from LOGIQ V2/LOGIQ V1 before doing backup
of the Patient Database.
Depending on the location set-up, either move the images to a
remote server or to removable media like DVD or CD discs.
To Next Page
Loading...
Need help?
General
