System Setup
3-8 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
Unpacking the LOGIQ V2/LOGIQ V1
When a new system arrives, check that any components are not
damaged and are not in short supply. If shipping damage or
shortage occurs, contact the address shown in Chapter 1
NOTE: Please check the LOGIQ V2/LOGIQ V1 console is well
assembly after unpacking the system.
1. Cut the adhesive tape and open top covers of paper carton.
Figure 3-1. Open Top Covers of Paper Carton
Please carefully unpack the system, and do not dispose the
package of LOGIQ V2/LOGIQ V1, so that it can be reused for
service.