GE MAC 1200 ST Service Manual

Revision D MAC 1200 resting ECG analysis system 1-5
2012250-095
The Basics: Basic Information
Basic Information
This service manual describes software version 6 of MAC 1200 resting ECG
analysis system.
The MAC 1200 resting ECG analysis system is a portable electrocardiograph with
an integrated printing unit. It is used to acquire, record and process ECG signals.
The integrated LCD graphics display shows three ECG channels. It also displays
status information, filter settings, speed/format, gain and the status of the electrodes.
With the setup feature, users can set up the device and the modes for his own needs.
The MAC 1200 resting ECG analysis system offers three modes of operation:
ECGs acquired in automatic (12-lead) mode can be transmitted to the MUSE or
CardioSys system directly or via modem.
A NC-battery with a charging circuit is integrated into the unit.
In addition, a pump for the KISS system can be integrated into the instrument as a
separate option.
 NC battery with charging circuit is integrated in general
 Automatic mode with CSI protocol for transmission
 Automatic mode with interpretation (Option Code)
 Automatic mode with storage for up to 40 ECGs (Option Code)
The acquired ECGs can be transmitted to MUSE or CardioSys directly or via a
Modem.
Additionally the MAC 1200 ST can run stress test operating mode (Option
Code).
To control stress test devices the MAC 1200 ST has a modified keyboard with
additional keys for stress test.
International USA
Automatic 12-lead
Manual 6-lead
Arrhythmia Arrhythmia

GE MAC 1200 ST Specifications

General

Brand	GE
Model	MAC 1200 ST
Category	Medical Equipment
Language	English