3-12 MAC 1200 resting ECG analysis system Revision D
2012250-095
System Test Function: V24 Tests
Send and Receive with Device (3)
Sending and receiving can be tested with a remote device by pressing the 3 key. The
device should be connected as described in
“Send Test String to Device (2)”.
After pressing the 3 key a test string is sent to the remote station. The following
message appears on the display.
Transmitting: Hello world!
Receiving: [ ]
A subsequent input at the remote station is sent back to the device and displayed
there. Moreover, it should be noted that an input must take place within 10 seconds
and the input terminated with the return key.
To Next Page
Loading...
Need help?
General
