SecoGear – Installation, Operation and Maintenance Manual 53 of 56
Paint Refinishing
Indoor switchgear is finished with durable powder
coat paint finish. To refinish damaged areas, remove
all loose paint, rust, scale, oil or grease. Sand any
scratches smooth using 220 grit paper or finer.
Touch up the repaired area using the touch up paint
included with the equipment. If major repair is
necessary, replacement parts may be necessary.
Application of special paint will be per the
manufacturer’s Product Data Sheet, which includes
instructions on thinning and application.
Circuit Breaker Lift Truck
Under normal conditions, no special maintenance procedures
or lubrication is required for this device. If the cable is
abraded under any condition, it should be inspected for
broken strands or other damage and replaced if necessary.
To Next Page
Loading...
Need help?
General
