X
GEM-P9600 Installation Instructions
L
NAPCO Security Systems
WI742D 5/03
!
Page 6
!
800 Event Log.
!
Overview Mode permits monitoring and control of total system from one keypad.
!
Guard-Tour programmable for start time, tour length, and check points (tour stations).
!
Two programmable Entry Delay times.
!
Two Interior-Zone groups.
!
Dynamic battery test interrupts charging and places battery under load every four hours.
!
Chime by zone; programmable duration.
!
Non-volatile RAM retains memory during power losses.
!
Quickloader programmable.
!
Auto-Download Log.
!
Exclusive V.A.L.I.D. feature (Verifying Automatic Line-Integrity Diagnostic) reduces false alarms due to changes in
line resistance.
Communicator Features
!
Compatible with all major receiver formats, including BFSK, 4/2, Modem 2, SIA, 4/3/1, 4+2 Express and Point ID.
!
Rotary dial and TouchTone
TM
with Rotary backup.
! Three 20-digit telephone numbers.
!
Backup Reporting; Double Reporting; Split Reporting.
!
96 User Codes with Opening/Closing Reporting by user.
! AC Failure Reporting with programmable report delay.
!
Supervised telephone line with programmable delay.
!
Pager capability.
Keypad Features
!
English-language LCD display; LED and sounder annunciators.
!
Supports up to fifteen 4-wire keypads.
!
Access only capability.
!
Provisions for fire, police and auxiliary panic alarms.
!
Integral 4-zone EZM included in each keypad (GEM-RP1CAe2/GEM-K1CA only).
!
Communicator Test to Central facilitates testing; Locate, Fault-Find and EZM-Locate diagnostics simplify trouble-
shooting.
! PGM output.
To Next Page
Loading...
Need help?
General
