5. To return to the Main Menu from any screen, simply press the X (Exit)
key until you reach the Main Menu.
3.3 Accessing the Programming Mode
1. Open the front door of the machine and insert the safety key to restore
power to the machine. The machine is now on.
2. Press the Program Entry (
button 1)
on the
service keypad (see page 69),
located inside the door. The LCD will
display the screen as shown opposite.
Enter the 4 digit engineers entry pin
code using the drink selection keypad.
N.B. The factory default code is entered by pressing the sequence 1-1-1-1.
You may be issued with your own personalised code.
3. Press the ↵ (Edit) key. Providing the
engineer has entered the code correctly,
the LCD will display the screen as
shown opposite.
Press the ↵ (Edit) key to access the
engineers program or X (Exit) key to
return the machine to standby mode.
4. The LCD on the front of the machine
will display the top level programming
menu screen - Main Menu. The first
available menu Data Recall is
highlighted indicating that it can be
selected. To move to a different menu
press the ▲ (up) or ▼ (down) keys on
the drink selection keypad until the
required menu is highlighted.
5. With the required menu highlighted,
press the ↵ (Edit) key to select it. Using
the Price menu as an example, the LCD
will display the sub menus as shown
opposite.
Technical Manual
20
To Next Page
Loading...
Need help?
General
