6. If Extra Sugar is required the customer presses the sugar button a
second time. A third press will display the No Sugar selection.
Pressing the sugar button again will revert to the Sugar selection.
7. Once the required drink has been selected, press the Start button on the
keypad. All lit buttons will be extinguished apart from the drink selection
button which flashes indicating that the drink is being vended.
Unless the customer has placed their own
cup into the dispense area, a cup will
automatically be ejected from the cup
drop unit into the dispense area and the
drink selection will be delivered into the
cup. Whilst this operation is in progress
the LCD will display the screen shown
opposite.
8. After the beverage has been dispensed the LCD will display the message
Thank You and the machine will beep once. The message on the display
will change to read Please remove cup. The drink can then be carefully
removed from the dispense area and the machine will return to standby
mode.
9. Certain drink selections do not allow the
strength option to be selected or milk
added. For example, if the customer
presses the Cappuccino selection button,
all of the other selection buttons will be
extinguished, the Sugar and START
buttons will light up and the LCD will display the screen opposite. The
customer can either press the START button to vend the drink or first
press the sugar button in order to add sugar to their taste as described
above.
Press sugar key to
increment strength
Freshbre w Tea
Credit .00 10.31 AM
Extra Sugar
No Sugar
Sugar
Freshbr ew Tea
Credit .00 10.31 AM
Extra Sugar
No Sugar
Sugar
Serving
10.31 AMChange .00
Cappucc ino
Press Sugar / Start
12.40 PM
Technical Manual
75
To Next Page
Loading...
Need help?
General
