61
Mod.45 front axle
WARNING: Do not dispose of fluids such as fuels, lubricants,
coolants and other various liquids, in the environment.
Check and
Top up
50
Check the oil level through plug A
If necessary, top up with oil of the
recommended type.
Clean
Keep the following part clean:
• the zone surrounding plug A.
Greasing
50
Grease:
• the front axle pivot pin (2 lubricators).
It is advisable to use
AGIP GREASE LP2
Change
800
Change the transmission oil with 3.5 kg of
new oil.
The recommended oil is
Agip Rotra MP SAE 80W/90
Oil draining: plugs B and D
It is advisable to unscrew plugs C on the
hubs to allow the oil to drain out more
easily.
Oil filling: plug A
Allow the oil to settle before checking the
new level.
To Next Page
Loading...
Need help?
General