74
Recommended lubricants
Comply with the following specifications if other lubricant makes are used:
Agip ATF II D Oil
Viscosity at 40° C (mm2/s)............... 34
Viscosity at 100° C (mm2/s)............... 7
Viscosity at -40° C (mPa.s)......... 45000
Viscosity index................................ 183
V.A. flash point (°C)........................ 200
Pour point (°C)................................. -42
Colour………………………………red
Volume mass at 15 °C (kg/l)........ 0.865
JD:
Standard:
Agip Supertractor oil
Universal SAE 15W/40
Viscosity at 40° C (mm2/s)............. 100
Viscosity at 100° C (mm2/s).......... 13.6
Viscosity at -15° C (mPa.s)........... 3300
Viscosity index................................ 135
Flash point V.A. (°C)....................... 220
Pour point (°C)................................. -27
Absolute gravity at 15 °C (Kg/l) ... 0.884
JD:
Standard:
Agip Rotra MP SAE 80W/90 oil
Viscosity at 40° C (mm2/s)............. 144
Viscosity to 100° C (mm2/s)............. 15
Viscosity at -26° C (mPa.s)....... 110000
Viscosity index................................ 104
Flash point V.A. (°C)....................... 210
Pour point (°C)................................. -27
Absolute gravity at 15 °C (Kg/l) ... 0.900
JD:
Standard:
Agip GR LP 2 grease
NLGI consistency ............................... 2
Worked penetration (dmm)............. 280
Dropping point ASTM (°C).............. 182
Timken OK Load (lbs)....................... 50
Basic oil viscosity at 40°C (mm2/s) 160
JD:
Standard:
To Next Page
Loading...
