69
Engine air filter clogging sensor
Check
Check to make sure that the engine air
filter clogging sensor is in the right position.
If servicing is required, make sure that the
sensor is assembled correctly and
protected against adverse weather
conditions as indicated in the figure.
It is essential for cable A, that connects to
the electrical system of the machine, to be
routed through the lower part of the sensor.
If the protection is positioned incorrectly,
this could cause serious damage to the
engine’s air intake circuit.
Bodywork
WARNING: If you use jets of pressurized water for cleaning,
direct the jet well away from:
• tyres
• hydraulic pipes
• radiator
• electrical components
• soundproofing seals
and other components that could be damaged by the
pressure of the water.
WARNING: Do not dispose of fluids such as fuels, lubricants,
coolants and other various liquids, in the environment.
Check
Periodically check the condition of the bodywork. Abrasions and deep scoring must be
repaired by specialized personnel to ensure long life. Make sure that water does not
remain in hidden parts of the bodywork.
Clean
Clean the bodywork with a normal solution of water and a specific shampoo:
• when needed if the tractor is used in a normal environment.
• frequently if it is used in places near the sea.
• immediately after using organic substances or chemicals.
To Next Page
Loading...
Need help?
General