29
Calibration
The distance counter relies on the step counts and your stride length (the distance traveled
with one step). While the device has a default stride length, this “Calibration” setup for
accurate distance measurements using your stride length (i.e. step counts multiply by
stride length). Since the “Calibration” requires you to walk / jog (run) for a fixed distance
for it to count your steps and derive the stride length, you need to perform it at a track or
an open field with clear distance markings.
Calibrate jogging (Run) and walking (Walk) stride length separately:
1. Press the or key to select Run / Walk.
2. Press the key.
3. As in this illustration, you have selected to calibrate jogging (running) steps.
Press the key as soon as you start to run for 400 meters; press stop as soon as you
reach the 400 meters mark.
4. The device counts the number of steps you take to jog (run) for 400 meters and uses it
to calculate jog (run) distance. Press the key to save the calibration result or press
the key to return to option screen and repeat from Step 2.
Calibration
Walk
Run
0400 Meters
Run
Press to start
Calibration
0400 Meters
Run
Press to start
Calibration
400 Meters
Running steps 2311
Calibration
Press to stop
400 Meters
Running steps 4534
Calibration
Press to save
Running Calibration
Completed!
To Next Page
Loading...
Need help?
General