Storage conditions
■ Humidity must not be condensing. Humidity must be between 10%and
80%.
■
Be aware of the weight of the device.
■
When transporting using a transport aid (e.g., a pallet truck), the trans-
port aid must be able to carry at least 1.6 times the transport weight of
the device.
■ Secure the device to prevent it tipping over and falling down during
transport.
■
Never transport the device sideways or upside down.
■
The device must be stored in the original packaging.
■ Only store the device in dry rooms.
■
The storage temperature must be between -20°Cand+60°C.
■ Humidity must not be condensing. Humidity must be between 10%and
80%.
4.2 Fastening the transport lock
Personnel:
■ Trained user
Fig. 13: Transport lock
1 Transport lock
2 Screws
3 Spacer sleeves
4 Right side of device
5 Bellows
1.
For MIKRO 220 R:
Open the lid.
Check the bellows (
5
) underneath the motor cover for correct
seating.
2.
Close the lid.
3.
Lay the device down onto its right-hand side (
4
).
4.
Insert 3 transport locks (
1
).
5.
Screw in 3 screws (
2
) with spacer sleeves (
3
).
To Next Page
Loading...
Need help?
General
