9
Chapter 1 Installation Instruction
1.1 Typical Scene
Figure 1-1. Typical Scene
Typical installation location of devices:
1. AX PRO Control Panel
2. Repeater
3. PIR Detector
4. Sounder
5. Magnetic Detector
1.2 Precaution
1. Avoid installing the device on metal surfaces.
2. Avoid placing the device directly on the ground.
3. The device is not allowed to be wrapped in metal.
4. Avoid obstructions within 50 cm around the device, except for the installation surface.
5. The repeater needs to be installed between the control panel and the peripheral.
6. Check the signal strength before installation and it is recommended to install the device at the
green indicator location. (Do not wrap the detector with your hands when checking the signal
strength.)
To Next Page
Loading...
Need help?
General
