User Manual of Network Fisheye Camera
83
Chapter 8 Log Searching
Purpose:
The operation, alarm, exception and information of the camera can be stored in log
files. You can also export the log files on your demand.
Before you start:
Please configure network disk for the camera or insert a SD card in the camera.
Steps:
1. Click Log on the menu bar to enter log searching interface.
Figure 8-1 Log Searching Interface
2. Set the log search conditions to specify the search, including the Major Type,
Minor Type, Start Time and End Time.
3. Click Search to search log files. The matched log files will be displayed on the
Log interface.
Figure 8-2 Log Searching
4. To export the log files, click Save log to save the log files in your computer.
To Next Page
Loading...
Need help?
General
