HIKVISION DS-2CD2942F-W User Manual

User Manual of Network Fisheye Camera
92
3. Click Export and set the saving path to save the configuration file in local
storage.
Figure 9-14 Import/Export Configuration File
9.7.4 Upgrading the System
Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Browse to select the local upgrade file and then click Upgrade to start
remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect power
of the camera during the process. The camera reboots automatically after upgrading.
Figure 9-15 Remote Upgrade
9.8 RS-232 Settings
Purpose:
The RS-232 port can be used in two ways:
 Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port

HIKVISION DS-2CD2942F-W Specifications

General

Brand	HIKVISION
Model	DS-2CD2942F-W
Category	Security Camera
Language	English