User Manual of Network Fisheye Camera
84
Chapter 9 Others
9.1 Managing User Accounts
Enter the User Management interface:
Configuration >Basic Configuration> Security > User
Or Configuration > Advanced Configuration> Security > User
The admin user has access to create, modify or delete other accounts. Up to 31 user
accounts can be created.
Figure 9-1 User Information
Add a User
Steps:
1. Click Add to enter the Add User interface.
2. Input the user name in the text field as desired.
3. Input the password and confirm password for the user.
You can view the password strength from the page, and it is recommended to set
a password with high security strength for the user.
4. Select the user level from the drop-down list.
You can define the user as Operator or User. Different permissions are assigned to
the Operator and User level by default.
5. In the Basic Permission field and Camera Configuration field, you can check
or uncheck the permissions for the new user.
6. Click OK to finish adding the user.
To Next Page
Loading...
Need help?
General
