HIKVISION DS-2CD2942F-W User Manual

User Manual of Network Fisheye Camera
89
Figure 9-9 Modify an IP
(3) Click the OK to finish modifying.
 Delete an IP Address
Left-click an IP address from filter list and click Delete.
 Delete all IP Addresses
Click Clear to delete all the IP addrsses.
5. Click Save to save the settings.
9.5 Security Service
Purpose:
To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Steps:
1. Enter the Security Service interface:
Configuration> Advanced Configuration> Security > Security Service
2. Check the checkbox of Enable Telnet to enable the remote login by the telnet,
and uncheck the checkbox to disable the telnet.
3. Check the checkbox of Enable SSH to enable the data communication security,
and uncheck the checkbox to disable the SSH.
Figure 9-10 Security Service Settings

HIKVISION DS-2CD2942F-W Specifications

General

Brand	HIKVISION
Model	DS-2CD2942F-W
Category	Security Camera
Language	English