User Manual of Network Fisheye Camera
77
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 5.6.1 and Section 5.6.3 for detailed information.
Record Triggered by Line Crossing Detection
If you select Line Crossing Detection, the video will be recorded when the
line crossing event is detected.
Besides configuring the recording schedule, you have to set the detection
line and check the checkbox of Trigger Channel in the Linkage Method
of Line Crossing Detection Settings interface. For detailed information,
please refer to Section 5.6.6 Configuring Line Crossing Detection.
Record Triggered by Intrusion Detection
If you select Intrusion Detection, the video will be recorded when the
intrusion event is detected.
Besides configuring the recording schedule, you have to set the intrusion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Intrusion Detection Settings interface. For detailed information,
please refer to Section 5.6.7 Configuring Intrusion Detection.
(3) (Optional) Check the checkbox of Select All and click Copy to copy settings
of this day to the whole week. You can also check any of the checkboxes
before the date and click Copy.
(4) Click OK to save the settings and exit.
6. Click Save to save the settings.
6.3 Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured
To Next Page
Loading...
Need help?
General
