HIKVISION DS-2CD2942F-W User Manual

User Manual of Network Fisheye Camera
78
picture can be stored in the SD card (if supported) or in the network disk (For details,
please refer to Section 6.1 Configuring NAS Settings). The captured pictures can also
be uploaded to a FTP server.
Timing Snapshot
Steps:
1. Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2. Check the Enable Timing Snapshot checkbox to enable scheduled snapshot.
3. Select picture format, resolution, and quality for the snapshots.
4. Set the time interval between two snapshots.
5. Click Edit to set the arming schedule for timing snapshot. For details, refer to
Step 5 in Section 5.6.1.
6. Click Save to save the settings.
7. (Optional) To upload the captured pictures to the FTP server, configure the FTP
parameters and check Upload Picture checkbox in FTP Settings interface. For
details, please refer to Section 5.3.11 Configuring FTP Settings.
Figure 6-8 Timing Snapshot

HIKVISION DS-2CD2942F-W Specifications

General

Brand	HIKVISION
Model	DS-2CD2942F-W
Category	Security Camera
Language	English