Digital Video Recorder User Manual
84
Move the mouse onto the Information icon to show the real-time stream information,
including the frame rate, bit rate, resolution and stream type.
Figure 3-7 Information
For DS-7300/8100/9000HUHI-F/N series DVR, when H.264 IP camera is connected, the stream type
is displayed as H.264. When Smart 264 IP camera is connected, the stram type is displayed as
H.264+. When H.265 IP camera is connected, the stream type is displayed as H.265. When Smart
265 IP camera is connected, the stram type is displayed as H.265+.
3.3 Channel-Zero Encoding
This section is not applicable to DS-7100/7200HGHI-E1/E2 series DVR.
Purpose
Sometimes you need to get a remote view of many channels in real time from web browser or
CMS (Client Management System) software, in order to decrease the bandwidth requirement
without affecting the image quality, channel-zero encoding is supported as an option for you.
Step 1 Enter the Live View Settings interface.
Menu> Configuration> Live View
Step 2 Select the Channel-Zero Encoding tab.
Figure 3-8 Live View- Channel-Zero Encoding
Step 3 Check the checkbox after Enable Channel-Zero Encoding.
Step 4 Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
Step 5 Click the Apply button to activate the settings.
Step 6 After you set the Channel-Zero encoding, you can get a view in the remote client or web
browser of 16 channels in one screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
