Storage System User Manual
16
3.3.2 Default Settings
Purpose:
You can reset system to factory defaults when system is abnormal. You are recommended to reset system under
the direction of professional technical support.
Resetting operation won’t restore administrator user name and password, RAID configuration, hot spot
configuration, and network parameters.
Steps:
1. Click Reset system to pop up reset system dialog.
Figure 3. 8 Reset System
2. Enter yes or YES in text field and click OK to reset.
3.3.3 Managing Maintenance Log
Purpose:
When system is abnormal, you can download the maintenance log to analyze problems.
Steps:
For details, refer to 9.1 Operation Log.
3.3.4 Modifying Password
Purpose:
You can modify password for basic management system and HYBRID SAN sub-system user.
Steps:
1. Click Modify password. And modify password window appears.
2. Select User Name as web_admin or nvr_admin.
web_admin: Basic management system user name.
nvr_admin: HYBRID SAN sub-system user name.
3. Enter Old Management Password and the same password in New Management Password and Confirm
Management Password.
The security level of modified password should not be lower than low security.
Password can only contain numbers, lowercase, uppercase, and underline for your password.