Advantage:
Data network interfaces are fully used.
Load balance when sending data.
Disadvantage: Load balance isn’t supported when receiving data.
Definition:
The storage system allocates input and output traffic to each data network
interfaces, according to current load.
It is recommended to use the mode when sending and receiving data to
multiple clients.
Advantage:
Data network interfaces are fully used.
Load balance in both sending and receiving data.
8.1.5.3 Network Work Speed
Purpose:
It is the speed of all data network interfaces. The default network work speed is 100 Mb/s. It is recommended to
set network work speed according to actual network situation.
Steps:
1. Click Modify of Network Word Speed.
2. Select Network Work Speed as 1000 Mb/s or 100 Mb/s.
3. Click OK and click OK in confirmation dialog box to save the settings.
8.2 Alarm
Purpose:
The storage system supports notifying you about the occurring alarms via e-mail and SMTP manager.
Steps:
Click System in navigation bar and choose Alarm to enter Network interface.
Figure 8. 10 Alarm
8.2.1 Alarm Type
Purpose:
The Table 8. 3 Alarm Type Description describes the supported alarm types and corresponding event level. E-mail